28ML MODELCOTE MATTCOTE E/F/D 28ml Finishing Product

Modelcote Matt Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, low-sheen matt finish.

Usage

A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, low-sheen matt finish.

Substrate

Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Matcote is usually applied as the final coat to a fully painted and decaled model.

Application

Brush or airbrush. Thin suitably when airbrushing using Cellulose thinners.

Drying Time

Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.

Coverage

Dependent on application and thickness of coats.

How to Clean

Brushes: Use Cellulose thinners. Airbrushes:Flush through using cellulose thinners.