Army_Air_Force Posted December 20, 2018 Share Posted December 20, 2018 My daughter and I won one of the Airfix Christmas competitions in 2017 and the prize was the D-Day Battlefront set. Due to other modelling projects, it's taken until now to get it on the bench. A few days ago, we were thinking about the layout and considered it unrealistic to have a Sherman and Tiger that close together, without one being blown into a thousand pieces! So we decided to save the Tiger for another diorama and replace it with a Willys MB, which were being sold cheap at Aldi. Here's the contents of the basic D-Day set. The two tanks, house kit, vac-formed base and those horrible rubbery plastic figures. Still, she's made a good job on all her previous models, with a lot of guidance, so I have high hopes for this one.EDIT - all the pictures were lost when Airfix changed the forum software. I've tried to edit this post to see if I can add the pictures back in. In time, I hope to repair the whole thread. Link to comment Share on other sites More sharing options...
Army_Air_Force Posted December 20, 2018 Author Share Posted December 20, 2018 Yesterday afternoon, after school, we made a start on the Sherman. Wheels and suspension first. Assembling the suspension units was a bit fiddly. All the wheels needed their centre holes enlarging or centering as the moulding wasn't great, so my daughter did that with a needle file while I looked at the suspension arms. The rear arms wouldn't fit over the axles and the shallow hole in them was quite close to the edge of the moulding, leaving little plastic to drill out. So each axle had to be tapered slightly so that it would fit the shallow hole in the rear arms. The kit instructions call for them to be assembled and fitted to the hull, but I think we'll leave them off at least until the wheels and chassis area have been painted. While those were drying, we turned out attention to the hull.Sometimes I have to assist with the parts cutting, as on some of the thicker sprues, my daughter just doesn't have the strength to cut through them, and often the part size, shape and position on the sprue wont allow cutters to fit the space.Once the bits were cleaned up, the lower hull was assembled.The turret parts were cut out while the hull dried for a bit and then the upper hull was attached to the lower hull and that was the end of the first day. Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted December 21, 2018 Share Posted December 21, 2018 As you say; well that and you need 3 Ronsons to "brew up" oneTiger anyway... Link to comment Share on other sites More sharing options...
DavidJC Posted December 21, 2018 Share Posted December 21, 2018 Fantastic work from the two of you, and fantastic to see a young person enjoying modelling so much. Thank you for sharing it with us 😆 Link to comment Share on other sites More sharing options...
Army_Air_Force Posted December 21, 2018 Author Share Posted December 21, 2018 At my daughter's request, we had another modelling session after school today. A trial fit showed a reasonable amount of room to get a paint brush in and around the suspension units for painting. The drive sprocket looked fragile and as it projected forwards from the hull, we would leave it off for now. The rest of the wheels and suspension units would be glued. The first side was done and left to dry for a few minutes while we cut and trimmed the drive sprocket parts. The second side was done nextAfter a few minutes for the solvent to stiffen the joints, the tank was turned and weighted slightly to ensure all the wheels lay flat. Two steel rulers, held in place by weights, prevented the wheels from spreading outwards under the weight. Everything was then left to dry. A few of the photos I'd taken were blurred as the camera wasn't on macro, so I went back out to the workshop tonight and took a few more with the tank out of the jig.Finally, a feel good picture with the aid of a bit of Blu-Tac to hold the barrel and mantlet in place. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted December 24, 2018 Share Posted December 24, 2018 Fantastic work, Army_Air_Force. Do keep the pictures coming! 😀 GNR-Gordon-4 (AF) Link to comment Share on other sites More sharing options...
Army_Air_Force Posted December 24, 2018 Author Share Posted December 24, 2018 I'm waiting for the next batch to be moderated. Link to comment Share on other sites More sharing options...
NWR-Gordon-4 Posted December 24, 2018 Share Posted December 24, 2018 OK. That will probably be in a few more days, or could even be next week now, since Christmas is here. GNR-Gordon-4 (AF) Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted December 27, 2018 Share Posted December 27, 2018 Experience says that the return idlers on Shermans (and M3 medium, Ram Kangaroo etc) are weaker than the drive sprockets. Link to comment Share on other sites More sharing options...
Army_Air_Force Posted December 27, 2018 Author Share Posted December 27, 2018 Further progress on Saturday morning. As an afterthought, we thought it would be nice to have a couple of crew in the tank. A search through my spares box found a few GI's, a couple of which would do. The driver was trimmed a bit to fit in next to the hull, and he was also mounted on a block of acrylic to lift him up to hatch height./media/tinymce_upload/0063ee1bfdd9d61b35dda3e77dcec3c7.jpg We wanted to add him after the tank was painted, so needed a way to get him inside the assembled hull. To do this, I chain drilled a hole under the turret which would hopefully be big enough to get him in. It took a few goes with some tweezers and a piece of wire to poke him into the correct location,. While it was difficult, it was possible. Both hatches were opened up a bit and also carved out on the inside to give a little more shoulder room. It's a tight fit on both the model and 1/1 scale Sherman, with the edge of the hatch, just at nose height, so you have to be careful if the driver steps on the brakes a bit hard!! Only one hatch has been opened up at this point./media/tinymce_upload/36cd988d5afc2a8ee076e3e093e4a9f5.jpgThe turret assembly was next. /media/tinymce_upload/c4561a7efd12f2b2cd5d6290ab172355.jpgIdler wheels fitted./media/tinymce_upload/1e3614d3fbbd530cc52a9f2528716036.jpgThe barrel was the last job of the morning, which was then supported and left to set./media/tinymce_upload/e594dfa8835e5abcfb0e4ff92dda47fd.jpgLater in the afternoon, once the glue had time to harden, I popped "Kevin" and "Dave" ( as they have come to be known ) into the tank for a picture. Dave needs a tiny packing piece to lift him a little further up, but I may need to either trim his shoulders or the inside of the hatch to do this./media/tinymce_upload/785e94bac67b5602d3e14dbe693eea6d.jpg Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 4, 2019 Author Share Posted January 4, 2019 I've had a nice Christmas cold, starting on Christmas day, which has knocked me out for ten days so far, so have managed no modelling over the holiday. I started to feel a little more human today, so took my daughter out to the workshop to do some more of the Sherman. So the next job was to get some olive drab on the tank in preparation for the decals and final assembly. We decided to used the kit acrylics, which up until now, I've hardly ever used except for canopy frames and small touch ups./media/tinymce_upload/f9db78c785df30224ad3c384500e3510.jpg All round the wheels and suspension units were first to be painted, getting all the small fiddly areas done./media/tinymce_upload/db06827a668dd3ef136c7b3cf8201e4c.jpgAs well as the suspension, the two separate sprockets were painted./media/tinymce_upload/87817a68ea2b9abe4bafd40569529faa.jpgWhile the suspension was left to dry for a while, we moved on to the turret./media/tinymce_upload/9684c922740dd61ac36e231a9647c0f1.jpg The turret was completed and then we moved back to the hull./media/tinymce_upload/73426c88d778020c8237b1e31b371757.jpg While the wheels were still a little tacky, they were dry enough to hold to allow the painting of the rest of the hull./media/tinymce_upload/8e49c4facc9c77c7db145d5ac474db16.jpgThe hull almost done. /media/tinymce_upload/a29d6d91c890ce3ffc23eead0eba3ac6.jpgThe hull is now done with one coat. It may need another coat, but will have a check once it is fully dry. By the time it has been decalled, some additional tree trunk armour added on the side it could be ok. I also want my daughter to have a go at some weathering, perhaps with some washes and some mud added to the wheels and tracks./media/tinymce_upload/8ce43a4ced5edd5153c1174f4f43b530.jpg Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted January 9, 2019 Share Posted January 9, 2019 Er, you wouldn't find tree "armour" on D-Day itself. Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 10, 2019 Author Share Posted January 10, 2019 Just because it's the D-Day set, doesn't mean it's D-Day. Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 10, 2019 Author Share Posted January 10, 2019 Yesterday, I gave the Sherman a few thin sprayed coats of clear gloss so that it would be dry for today. Today after school, my daughter and I did the decalling. She started by applying the division badge on the front.The hull was then put to one side to allow that to dry a little while and moved to the first star on the side of the turret. It took her a little while of sliding it around until we were happy about its location. I try not to interfere too much, asking "does that look parallel", "is that the same height as the other side" until she pushes the decal into the correct position. Sometimes she's still a little heavy handed and I give it a micro nudge into place, but generally, she's quite accurate./media/tinymce_upload/088c976aa0d43aeca749e97afd9bbf3d.jpg The turret was then put to one side to dry and the hull brought back to add the registration on the side. I told her to look at the plans and see where the letters lined up with on the tank, such as the last letter directly over the last wheel. That helped with deciding the correct location./media/tinymce_upload/4437281a0432e01f7408eaceb477a219.jpg That was left to dry and the turret came back out for the star on the second side. Once both turret stars and both registrations were added, the star on the top of the turret was applied. It was a little more tricky being partially under the commander's hatch./media/tinymce_upload/3c2919a81873d726ae6f75e687ec860c.jpgA little Microsol was added to the decals to help them sit down and after that dried, Kevin the Commander and Dave the Driver came to check on the progress. Both were pleased with their new ride!/media/tinymce_upload/eb0a3c2f0744a10fa09856ca14c5e107.jpgTime for a few more photos. Both the tank crew and my daughter were impressed with how it was looking./media/tinymce_upload/3344a1e0d3ebe35db2db92bbeb65d15d.jpg/media/tinymce_upload/4acdb593fc096a1ff45fa7e16fdb21e7.jpgThe afternoon was almost over, so we put the tank in a box out of the way for the decals to fully harden and moved on. So in the last few minutes of the afternoon, she started butting out parts of the bombed out house./media/tinymce_upload/c0996c4d3316b97e6c3594d0ec7c14a6.jpg Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 13, 2019 Author Share Posted January 13, 2019 We had a little time spare this morning, so gave the Sherman a couple of washes. The first was a black wash all over. We used the Airfix acrylics, diluted with car screen wash. It was then force dried with a hair dryer. /media/tinymce_upload/3e0d9a368621fec5af08a571e5a8c08d.jpg Next came an earth brown wash over the suspension units, wheels and front of the tank. When you ride around in a Sherman on a dusty day, you soon realise how much dust and dirt is thrown forwards from the front of the track as it goes around the sprocket. This immediately blows back in your face!/media/tinymce_upload/a5216403dff9bc2f040510ae4b4d12b3.jpg The tracks were given an earth wash too, but we'll add some clumps of mud later, once they are fitted./media/tinymce_upload/e8914c53b2b0807c1816b9d0028247f7.jpgWe're both rather pleased with the way the weathering has come out. It's not far away now. Tracks, mud, hatches, logs, crew and possibly an aerial, although that might wait until the final assembly of the diorama. /media/tinymce_upload/5961756d4049d7a848171d6d6c32af6a.jpg Link to comment Share on other sites More sharing options...
Peter s Posted January 15, 2019 Share Posted January 15, 2019 For the scale that's amazing! Logs are really for muddy terrain. For post d day how about a Cullen cutter? Pretty easy to scratch with 1mm plasticard. Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 15, 2019 Author Share Posted January 15, 2019 Easy for me perhaps, but this is my 9 year old daughter's build, and she wants log armour on the side. Link to comment Share on other sites More sharing options...
Peter s Posted January 16, 2019 Share Posted January 16, 2019 Easy for me perhaps, but this is my 9 year old daughter's build, and she wants log armour on the side.If it's her model and that's what she wants that's all that matters. I'll happily sacrifice true accuracy to do the model i want too. I started doing kits at 7 year old and your daughter puts my childhood models to shame! Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 16, 2019 Author Share Posted January 16, 2019 Wednesday is my daughter's modelling day, so I did a little preparation while she was at school to allow things to move a little faster once she was home. The twigs that we collected on the way home from school a few weeks ago were cut to length and the ends chamfered to simulate being axed. They were then glued together in sets of three so they had time to dry./media/tinymce_upload/c78d73b2739b146e11568c8426b5d8f0.jpg Kevin and Dave were painted, also so they would be dry for late afternoon. Dave also had the base drilled and a piece of wire glued in. The wire formed a handle to allow him to be fed in theough the hole in the hull and then positioned in his driver's hatch. Kevin's backside and thighs were trimmed into a groove to allow him to sit better over the turret hatch rim./media/tinymce_upload/e75971413e8f65efebec9a26b39cb31c.jpgThe first job my daughter did tonight was to start assembling the bombed out house, so parts could start drying while we worked on the Sherman. After that, she turned to the logs, now glued into one piece. We used cotton to represent rope to tie the logs on to the tank. She tied one knot at the top of the stack, adding a tiny drop of PVA glue to hold the first knot. Both ends of each set of logs was roped. They were all left to dry./media/tinymce_upload/9404aeaba7b4a3c694162791b7fcb634.jpg The rubber tracks were flipped inside out and taped down to a piece of wood for joining. The hot knife method was used for joining them./media/tinymce_upload/491559de036bc4574ef0caec897edb99.jpg The holes for the sprckets were too small to allow the sprocket to fit, so I gave her a needle file to slowly open up the holes, test fitting as she went./media/tinymce_upload/a809a9a62a0c9a6febf283708b808151.jpg Once both sides were a snug fit and the paint was cleaned from the hull and sprocket, I gave her some tube glue to brush onto the mounting points. We then fitted the sprocket into the track, which was already looped over the rest of the wheels, and slotted the sprocket into its hole. /media/tinymce_upload/da0a3d161e19af31c926897e8397ff66.jpgWith the tracks attached, the logs were next. One piece of the cotton thread was wrapped around a couple more times and then glued on the back, before the logs were then glued to the side of the hull. Both sides were done and weighted down while they dried./media/tinymce_upload/e3bc082385c710e10b5746f51a5f2567.jpgWhile they were drying, Kevin was glued to the top of the turret./media/tinymce_upload/d354e3d1bfbb483d6b9d7765ff336baf.jpgAs mentioned earlier, the house was started first this afternoon. We hopped on and off the house, leaving each wall to dry a while before coming back to add the next one./media/tinymce_upload/776cfd4237de8298e094dd6befa6d479.jpgI had a couple of metal 'V' blocks which made it a little easier for my daughter to position and hold the parts while she ran the solvent glue into the joints with a brush./media/tinymce_upload/d11edd26b139e136c8fd7d948f2804d2.jpg With all the walls assembled, the floor was glued in. The roof was cut from the sprue and cleaned up, but left off for now to allow easier painting of both the floor and roof parts. /media/tinymce_upload/b926b6fe87882160c728b7f12419782a.jpg With a bit of heat from a hair dryer, the logs were dry enough for a few quick pictures. The cotton thread still needs cutting to a suitable length, so for now was just draped over the hull./media/tinymce_upload/aa1266e7bb334e091a67522b8dcac51d.jpg Time to see the bigger picture. My daughter is very pleased with how it is all looking. She should be pleased, she's doing a fantastic job - still with lots of guidance and a couple of extra hands from me here and there, but in general, mostly her own work./media/tinymce_upload/a15a85f5f97de806dc621bc06d897699.jpg The tracks on the Sherman are a fraction on the long side. To help to keep them in place, the last job of the day was to add some PVA glue to the lower track and wheels. The tank was then weighted down to keep the wheels in contact with the track while the glue dried./media/tinymce_upload/5c435a200af07ab98c8cb8aaff191333.jpg Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted January 17, 2019 Share Posted January 17, 2019 Ah, I wasn't clearly aware of the forward observation post in the set. Those only appear once we start moving inland, which makes the log applique "not provably wrong". Link to comment Share on other sites More sharing options...
T2B Posted January 20, 2019 Share Posted January 20, 2019 Fantastic build, your daughter is doing you proud! And I love the logs on the tank, makes Airfix's horrendous Sherman very presentable! Your daughter has done wonders with the old mould! Looking forward to further updates ........ Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 23, 2019 Author Share Posted January 23, 2019 Another build session after school today. We got the ropes cut down and glued in place and after that, Dave the driver was installed. The wire used to install Dave would be trimmed once the glue had a hold. The front hatches were added next./media/tinymce_upload/5ad73755389283b9956b09b0f3ff39fe.jpgBack on the house, we wanted wood beams and terracotta tiles on the roof. Because of the layers and order of detail in the roof, the inside and outside would be painted in different orders. On the inside, my daughter painted the red tiles first, allowing the joists to be added after. On the outside of the roof, the whole area was painted timber coloured first, and the tile colour added after. Red and dark earth were mixed to give a toned down colour for the tiles./media/tinymce_upload/8be288d562585357de1199b51d7bef17.jpgThe loft floor was painted a brown for the first shade of the timber planks. The outside of the walls came next, being painted a base colour for the stone finish. /media/tinymce_upload/71380504079c4f2d3631ba33d76f3a77.jpgSome of the small wooden crates were also painted. The copper wire on Dave was trimmed allowing the turret to fit, but it won't be glued until the final layout of the diorama is decided. By the time the house walls had two coats and the roof painted, it was 5:30 and time for food./media/tinymce_upload/635992a162f17b7f48bc57c34b0c9b93.jpgBoth Dave the driver and Kevin the commander are very pleased with their new ride. Both are eyeing up the Airfix Jeep box out of shot and are wondering who will be driving that!/media/tinymce_upload/8afbfc162732048a20497c04e14fd942.jpgWe plan to find a nice country lane somewhere which will make an appropriate background for a photoshoot once the whole diorama is complete. For now, this printed backdrop will have to do./media/tinymce_upload/0da30a5b3991436fb378d7a058a4207a.jpg Link to comment Share on other sites More sharing options...
Sailorman Posted January 24, 2019 Share Posted January 24, 2019 Looks very good even with the printed backdrop! Link to comment Share on other sites More sharing options...
Army_Air_Force Posted January 30, 2019 Author Share Posted January 30, 2019 Today was modelling day again, but part way through the day, I spotted we'd made it famous, on the Airfix Facebook WorkspaceWednesday picture! My daughter was rather pleased when she got in from school!The first job tonight was to start painting the interior walls white. I thinned the kit acrylic and set my daughter painting while I was getting dirty with the tank ( more of that shortly ). She did one coat and force dried it with a hair dryer before applying a second coat. It is seen here after the first two coats./media/tinymce_upload/8991cfddddd1ed382ecc6f28f476d8a6.jpg While the second coat of white hardened off for a while over a heater, I set her away painting the base, starting with the road and paved area./media/tinymce_upload/e2fba856086d15f47c84f6a0b313d1e6.jpgShe followed that with two different shades of brown for the floor boards of the bombed out house and other destroyed buildings. We'll be adding more detail and texture to the base, as some of the vac-formed edges are a bit soft looking for rubble and wreckage. While she did this, I gave the house another couple of white coats and touched up the floor in the house. /media/tinymce_upload/6c3eeae3976bcfa857aa28a1908f9676.jpgI'd given the roof a sandy wash by this time, and it all looked good with the house on the base. The road needs lots more work yet, but it's beginning to come together seeing some colour on the base. I still need to find some wood to glue the plastic down onto, as the vac-forming is very thin and will be easily cracked./media/tinymce_upload/e110d16727d82c2e768af830743e3a01.jpgThe figures had previously been primed with thinned PVA glue, so today I set my daughter loose giving them a base green coat. Having the PVA primer made a big difference to the application of the paint./media/tinymce_upload/1bb7f93ead21f006af06d1cca8149f36.jpgAt the start of the afternoon, while my daughter was painting the first white coats on the house, I was studying mud! Using Adrian Barrel's M4A4 Sherman as reference, I made notes of where the mud gathered./media/tinymce_upload/b0ac5534ae55e4567dc21c63245d823b.jpgTo replicate the mud, I used some first coat wall plaster, dilute PVA glue and earth brown acrylic paint all mixed together. The first coat plaster is quite gritty and seems to work well. It was applied with a small brush and while all still wet, some model railroading grass powder sprinkled on here and there./media/tinymce_upload/fbde99e4aa340c556326863f143c6739.jpgAfter the plaster had dried, I went back over the mud with a few brown shades of enamel. Once we work out where the Sherman will be on the diorama, we'll also have to add some clods of mud along the road, deposited by the tracks. That was another two and a half hourswork done. While the progress today wasn't as spectacular as some other days, it's all steps along the way to completion, /media/tinymce_upload/3d67bb5b7b9701e5d2f60ae8d883d5fa.jpg/media/tinymce_upload/4327ba79f9233aebda688aefdb93f785.jpg Link to comment Share on other sites More sharing options...
Kenneth ONeill Posted January 31, 2019 Share Posted January 31, 2019 Those 2 "blobs" on the extreme left of the figures shot are actually parachutes being furled, and should be white in period. (when I was your daughter's age I thought they were flame throwers) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now